사업영역

Power of Intelligent New Technology

Probe Card

AAO Mold makes your pins be the Best
Features & Benefits
Advanced Design

The PEC Design allows your products to achieve advanced properties such as increased C.C.C. and steady forces.

1:60
High Aspect Ratio

PEC Mold enables aspect ratio up to 1:60 with differentiated MEMS technology

Easy to Stack-up

Multilayer lamination is convenient with 21 layers or more plating.

2.0 um
Fine Pattern

Enable to minimize pattern up to 2um

Conventional PR method
Conventional PR method
PEC Mold
PEC AAO Mold
Customizing MEMS Pins

PEC Enable to Make Various Designs as Your Desires

Customizing MEMS Pins
  • PEC Design allows you to implement the various models and functions for your product.
  • With PEC Design, we can provide products with fine force-controlled and high C.C.C.
  • Finer MEMS pins fabricated in the molds with a high aspect ratio
  • The 100um thick mold consists of one layer.
  • Excellent dimensional accuracy(≤ ±0.5㎛)
  • Superior plating layer flatness and precise layer composition
Better Performances

PEC MEMS Pins Enable to Make Your Product Stand Out.

*우측으로 스와이프하셔서 컨텐츠 내용을 확인하세요.

Probe type Dimension Probe
Characteristics
No.
of Beam		 Width
(㎛)		 Thickness
(㎛)		 Material Overall
length
(㎜)

 

 C.C.C
(㎃)		 ProbeForce (g·f)
(@ OD 75㎛)		 C-res
(mΩ)		 Typical
Overdrive
(㎛)
55 × 55 3 55 55 Pd alloy 3.3 1,875 2~2.5 ± 0.15 < 300 120
70 × 70 3 70 70 Pd alloy 3.8 2,625
4 70 70 Pd alloy 3.8 2,975

90 × 90

 3 90 90 Pd alloy 3.9 3,150
4 90 90 Pd alloy 3.9 3,920
5 90 90 Pd alloy 3.9 4,600
  • All models enable to customize as your requires : characteristics can be designed.

PEC Mold Makes Your Products Be The Best

5 beams within 90X90 MEMS Pin at the C.C.C. test
5 beams within 90X90 MEMS Pin at the C.C.C. test
5 beams within 90X90 MEMS Pin at the C.C.C. test
Stacked 21 metallic layers within 90X90 MEMS pin

Pin 디자인 설계를 통해 고객이 원하는 형태의 Pin 제작이 가능하며, 1:60의 높은 종횡비 구현이 가능합니다.
PEC는 pin을 제작하기 위해 다양한 디자인으로 MEMS 공정을 통해 정밀한 형상 제작이 가능하며, 화학물질에 대한 반응성이 우수하며
기존 Si wafer, sapphire, glass 기판과 동일한 설비 작업 및 공정이 용이합니다.

Capacity and Ramp up Capacity

Point Engineering is ready to ramp up based on your business demand

based on customer's demand
  • Production Lead Time : 3 weeks after placed an order.
  • Initial Order for a New Concept : 5 weeks (2 weeks for the design confirmation)
  • Monthly Capacity : 8” wafer 2,000 sheets(@2022)
문의하기
(Request)